21D, Taman Perpaduan Bakar Arang,
08000 Sungai Petani,
Kedah, Malaysia.
SWEEP RC HLR
Previous | 1 / 17 | Next |
SWEEP RC HLR
(AM/END) 27.5"
Roughcut HLR
X-Fusion’s new Roughcut HLR is the latest revolution of our coveted HLR damping system. Utilizing a fully bled bladder cartridge system, the Roughcut system was piloted by X-Fusion test rider Brian Lopes to an early season win at the Sea Otter Classic in 2014.
The heart of the Roughcut HLR damper is the single wall bladder system that completely separates the oil in the damper from air outside the cartridge. Eliminating mixing of air and oil means that consistent fade-free damping because there is no chance for oil cavitation or foaming. We also have a new piston design, with the shims positioned on a raised platform. This helps assist initial activation of the shims because the mating surface area of the piston and shims is reduced so the moment of inertia is also reduced.
There is another benefit to utilizing the bladder system: the high and low speed adjustments are now located on top of the fork crown, where they can be easily accessed for trailside tuning. Each adjustment click also provides a significant change as well, with a wider damping range from previous HLR dampers. In addition, because both of the high and low speed circuits are controlled by shims, the damping is super consistent and controlled. The rebound adjuster is now located at the bottom of the damper side leg.
FEATURES
- H: High speed compression damping, 16 clicks
- L: Low speed compression damping, 16 clicks
- R: Rebound damping adjustment, 36 clicks
- Roughcut HLR damper with high and low speed compression adjust
- LockX 15mm tool-less axle system
- Dedicated offset for 27.5
- Brake housing guides
SPECIFICATIONS
- Weight: 4.2 lbs/1905 grams
- Wheel Size: 27.5 inch
- Travel: 160mm (ITA 100-160mm)
- Stanchion: 34mm Aluminum
- Spring: Air
- Damper: Roughcut HLR damper with high and low speed compression adjust
- Adjustments: Rebound
- Steerer: Tapered
- Axle: LockX 15mm
- Offset: 46mm
- Axle to Crown: 551mm @ 160mm of travel
- Offset: 46mm
- Max Rotor Size: 203mm